Model, textures Greg Law
Dps Alex Brenzinger
Aircraft Catapult installation Bill Stacey
Tester and big help Mathias Pommerien
=======================================
INSTALLATION
Double-click GC_PrinzEugen.exe & extract to your CFS2 main directory.
Add these entries to descrip.dat file in the CFS2 INFO folder
Place this in the info folder descrip.dat file
# GC_PrinzEugen
German Heavy Cruiser
-------------------------------------------------------------------------------
Place this in the mdlnames file, which is in the CFS2 root directory
"GC_PrinzEugen"=German Heavy Cruiser
Place the GC_PrinEugen.jpg file in the CFS2/info folder.
--------------------------------------------------------------------------------
Catapult operation
To use the Aircraft catapult get the Ar196, which was used by this ship.
You will notice the Catapult doesn't turn with the plane. Unfortunately CFS2 doesn't allow this. To get the plane to face out board (to port). Start engine and use hard over
rudder. The plane will slowly turn on access. You can use a bit of throttle to speed it up. But be careful. Once in the right position use the wep for a 2 second burst. (W key). Make sure the throttle is on full before disengaging the wep. You may notice the aircraft shadow floats high when the plane is on the catapult and the biggest issue is the plane will not always appear centered n the Catapult. This is another CFS2 thing. Sorry we can't over come this. But are open to a fix.
Well have fun. Keep an eye out for any stray Swordfish.
--------------------------------------------------------------------------------
For best effect results, get all the add-on effects files you can.
-------------------------------------------------------------------------------
Arado Ar196 Aircraft.
To obtain the Ar196 aircraft made by Stuart Green go to
http://www.advsys.co.uk/peveril/hangar/hangar.htm
Arado Ar196 upgrade files for Catapult operation.
Find in the Zip file Aircraft. The files are those that adjust the Ar196 so it can be flown off the Catapult. Just copy these into the Ar196 folder and remove the "arado_ar196.CDP" file.
Copyright issues
This is Freeware.
It must not be used commercially without consent from Greg Law and Alex Brenzinger
Use the plane at your own risk. The authors are not responsible for any problems resulting from the use of this product.
